2% enhanced glutaraldehyde disinfectant (low taste, low foam)

2% enhanced glutaraldehyde disinfectant (low taste, low foam)

[Main active ingredients and their content] This product is a disinfectant with glutaraldehyde as the main active ingredient, with a glutaraldehyde content of 2.0% -2.4% (w / v).

[Formulation] Liquid

[Killing microbial category] can kill bacterial spores.

[Scope of use] Mainly used for immersion disinfection and sterilization of medical equipment.
[Instructions]
1. Add the pH adjuster and rust inhibitor before use, mix well and place in a covered container.
2. Immersion and disinfection of medical equipment: Immerse the cleaned medical equipment in glutaraldehyde disinfectant to completely submerge it, and then cover the disinfection container for 60 minutes. Rinse with sterile distilled water before use.
3. Immersion and sterilization of medical devices: Immerse the cleaned medical devices in glutaraldehyde disinfectant to completely submerge them, then cover the disinfection container for 10 hours. Rinse with sterile distilled water before use.
[Precautions]
1. External disinfectant should not be taken orally.
2. This product should be used as it is, prepared and used under well-ventilated conditions. Pay attention to skin, mucous membrane and respiratory protection.
3. This product should be sealed, protected from light, and stored in a cool, dry and ventilated place. It shall not be stored in the open air or mixed with other toxic substances.
4. At room temperature, the glutaraldehyde disinfectant after adding pH adjuster and rust inhibitor can be used continuously for up to 14 days.
5. The concentration of glutaraldehyde should be monitored during use.
[Specifications] 500ml / bottle; 2.5L / barrel; 5L / barrel
[Validity] 24 months
[Health license number] Lu Wei Xiao Zheng Zi (2017) No. 1303
[Executive Standard] Q / 371402AKX001